Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Malaguti
    3. : Dribbling

Model: Malaguti Dribbling
Part: Engine

To dismantle the engine of the Malaguti Dribbling, you will need to loosen the screws that secure it to its housing: at the central lower part of the frame. Once it is freed from the respective supports, disconnect all connectors and then unscrew the screws of the manifolds. At this point, unscrew the screws that secure the cylinder to the top and the cylinder head. This will give you access to the piston, which can be disconnected from the connecting rod, allowing access to the crankshaft; the components that need to be replaced should be replaced, and then reassemble the engine.

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Malaguti Dribbling?
How do you replace the clutch of the Malaguti Dribbling?
Dribbling To replace the clutch of the Malaguti Dribbling, you need to loosen the screws that secure the side cover located immediately below the engine block,…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos