Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the ECU from the Malaguti XSM-XTM 50

Model: Malaguti Xtm 50
Part: Control unit

This video is currently unavailable

In today's video, we will see how to remove and replace the ECU of the Malaguti XSM and XTM 50, following the instructions below. First, remove the seat of the motorcycle; then unscrew the bolts securing the fuel tank, which are located at the base and on the sides (disconnect the fuel hose and the electrical connector afterwards).

Once the tank is removed, unscrew the bolt of the ECU, disconnect the electrical cable to remove it; then replace it and reassemble everything, applying the reverse procedure!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How do you replace the air filter of the Malaguti XTM 50?
How do you replace the air filter of the Malaguti XTM 50?
Xtm 50 .. order to replace the air filter of the Malaguti XTM 50, you will need to loosen the screws that secure the triangular panel located on the left side.. …

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos