Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sherco Se 250
Part: Clutch

The clutch replacement on the Sherco SE 250 can be carried out by loosening the screws that secure the cover panel located on the right side of the motorcycle: once the panel has been removed, the underlying screws that secure the clutch discs can be unscrewed in order to insert the new ones. These can now be properly secured in their place and the panel can then be covered: after installation, it will be possible to verify that everything works correctly even after the replacement of the discs.

Posted on 2 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Sherco SE 250
How to Replace the Exhaust on a Sherco SE 250
Se 250 You can replace the exhaust on the Sherco SE 250 by loosening the screws that secure the side cover of the mudguard on the right side. Once the screw…
Replacing the Starter Motor of the Sherco SE 250
Replacing the Starter Motor of the Sherco SE 250
Se 250 This guide provides instructions for removing and replacing the starter motor of the Sherco SE 250 enduro bike. First, place the bike on the stand an…

How to Replace the Battery of the Kymco Agility 125?

To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel.

Watch the video!


by ScegliAuto

More videos