Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor of the Sherco SE 250

Model: Sherco Se 250
Part: Starter motor

Video tutorial

This guide provides instructions for removing and replacing the starter motor of the Sherco SE 250 enduro bike. First, place the bike on the stand and locate the starter motor at the bottom right of the engine; then unscrew the securing screws and disconnect the electrical wiring to remove the starter motor, as shown in the video.

At this point, carry out the repair or replacement of the starter motor, installing it correctly; once connected, check the engine ignition!


Posted on 3 June 2026 by ScegliAuto


Related tutorials

How do you replace the clutch of the Sherco SE 250?
How do you replace the clutch of the Sherco SE 250?
Se 250 The clutch replacement on the Sherco SE 250 can be carried out by loosening the screws that secure the cover panel located on the right side of the m…
How to Replace the Exhaust on a Sherco SE 250
How to Replace the Exhaust on a Sherco SE 250
Se 250 You can replace the exhaust on the Sherco SE 250 by loosening the screws that secure the side cover of the mudguard on the right side. Once the screw…

How to Change the Engine Oil in a Suzuki DR 650

This tutorial shows how to change the engine oil in a Suzuki DR 650, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then position a container underneath the bike, locate the drain bolt, and unscrew it using a 17mm socket. Allow all the oil in the system to drain out, open the filter cap, insert the replacement, and reassemble everything. Finally, pour in the required amount of oil through the designated top hole.

Watch the video!


by ScegliAuto

More videos