Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the bulbs of the instrument panel of the Malaguti Fifty Top, you need to use an object to pry off the protective panels located on the upper front part of the motorcycle, also loosening the screws that hold them in place. At this point, you can locate the screws underneath that secure the panel to its seat, in order to release it and disconnect the connectors at the back: at this point, the internal bulbs can be removed from their seat to insert the new ones. Finally, you can reassemble all the components that were just removed.

Posted on 17 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine Block of the Malaguti Fifty Top
How to Remove the Engine Block of the Malaguti Fifty Top
Fifty Top Below are the steps to remove the entire engine block from the frame of the Malaguti Fifty Top, following the instructions provided. First, place the…
How do you replace the fork on the Malaguti Fifty Top?
How do you replace the fork on the Malaguti Fifty Top?
Fifty Top To replace the fork on the Malaguti Fifty Top, you need to loosen the screws that secure the front wheel to its housing. It will also be necessary to…
Disassembly and Cleaning of Malaguti Fifty Top Mixer
Disassembly and Cleaning of Malaguti Fifty Top Mixer
Fifty Top To disassemble and clean the mixer on the Malaguti Fifty Top, first secure the motorcycle in a safe, immobilised position. This precaution is necessa…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos