Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Malaguti Fifty Top
Part:

To replace the fork on the Malaguti Fifty Top, you need to loosen the screws that secure the front wheel to its housing. It will also be necessary to remove the brake caliper from the corresponding disc so that the wheel can be completely detached. You will also need to disconnect the fork from the steering, allowing you to position the new one. The new fork can now be secured with the appropriate screws, and you can then reinsert the wheel. After securing the wheel, you will need to reconnect the brake caliper, ensuring that everything functions properly.

Posted on 10 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine Block of the Malaguti Fifty Top
How to Remove the Engine Block of the Malaguti Fifty Top
Fifty Top Below are the steps to remove the entire engine block from the frame of the Malaguti Fifty Top, following the instructions provided. First, place the…
How do you replace the bulbs in the instrument panel of the Malaguti Fifty Top?
How do you replace the bulbs in the instrument panel of the Malaguti Fifty Top?
Fifty Top To replace the bulbs of the instrument panel of the Malaguti Fifty Top, you need to use an object to pry off the protective panels located on the upp…
Disassembly and Cleaning of Malaguti Fifty Top Mixer
Disassembly and Cleaning of Malaguti Fifty Top Mixer
Fifty Top To disassemble and clean the mixer on the Malaguti Fifty Top, first secure the motorcycle in a safe, immobilised position. This precaution is necessa…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos