Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the exhaust on the Sherco SE 250 by loosening the screws that secure the side cover of the mudguard on the right side. Once the screws of this panel are loosened, you can detach it and locate the underlying fastening screws. At this point, proceed to unscrew the support screws and widen the clamp connecting the exhaust to the manifold. Now you can remove the old silencer, insert the new one, and secure it to the respective supports, ensuring everything functions correctly.

Posted on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Sherco SE 250?
How do you replace the clutch of the Sherco SE 250?
Se 250 The clutch replacement on the Sherco SE 250 can be carried out by loosening the screws that secure the cover panel located on the right side of the m…
Replacing the Starter Motor of the Sherco SE 250
Replacing the Starter Motor of the Sherco SE 250
Se 250 This guide provides instructions for removing and replacing the starter motor of the Sherco SE 250 enduro bike. First, place the bike on the stand an…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos