Do it yourself
Frequently asked questions about cars and motorcycles

Sherco Se 250 - Video guides

Sherco Se 250
How to Replace the Exhaust on a Sherco SE 250

You can replace the exhaust on the Sherco SE 250 by loosening the screws that secure the side cover of the mudguard on the right side. Once the screws of this …Read all…
Posted on 28 July 2026 by ScegliAuto
Sherco Se 250
Replacing the Starter Motor of the Sherco SE 250

This guide provides instructions for removing and replacing the starter motor of the Sherco SE 250 enduro bike. First, place the bike on the stand and locate …Read all…
Posted on 3 June 2026 by ScegliAuto
Sherco Se 250
How do you replace the clutch of the Sherco SE 250?

The clutch replacement on the Sherco SE 250 can be carried out by loosening the screws that secure the cover panel located on the right side of the motorcycle: …Read all…
Posted on 2 July 2025 by ScegliAuto

How to reset the tyre pressure warning light on a Hyundai Tucson

Below are the instructions to reset the tyre pressure warning light (TPMS) on a Hyundai Tucson. First, get into the vehicle and turn on the instrument cluster; then navigate to the vehicle settings until you reach the tyre pressure monitor, identifying the tyre with incorrect pressure. At this point, restore all tyre pressures according to the specifications indicated on the label; this will reset the TPMS and the warning light will be cleared from the instrument cluster!

Watch the video!


by ScegliAuto

More videos