Do it yourself
| ||||
|
Model: Piaggio Vespa Px 125
In this short and simple guide, we will see how to disassemble and replace the gasoline tap of the Piaggio Vespa PX 125, but also of the LML Star 125. First, we put the center stand and start unscrewing the seat screws to remove it; then we unscrew the gasoline tank screws, disconnecting the fuel tube from the carburetor, as shown in the video. At this point, we unscrew the internal screw with a socket wrench, in order to remove the old gasoline tap; we install the new one, tightening it perfectly, and reassemble everything!
Posted on 26 June 2023 by ScegliAuto
|
How do you change the engine oil of the BMW R 1200 GS?The replacement of the engine oil of the BMW R 1200 GS is carried out by loosening the bolts that secure the skid plate positioned in the lower part of the bike. Once this plate has been removed, it will be possible to unscrew the drain plug below, so that the used oil can be collected inside a suitably positioned container. Next to the drain plug you will find the oil filter, which in turn must be extracted and replaced with a new one. After the replacement, it will be possible to top up from the special vent on the crankcase to the left of the bike. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |