Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Tap on the Piaggio Vespa Px 125 - Lml Star

Model: Piaggio Vespa Px 125

Video tutorial

In today's tutorial, you will learn how to dismantle and replace the fuel tap on the Piaggio Vespa Px 125, as well as the Lml Star. First, lift the rider's seat and start removing the fuel tank; to do this, unscrew the fixing screws, disconnect the electrical connector, and the fuel hose from the carburettor, as shown in the video.

At this point, use the appropriate spanner to unscrew and remove the fuel tap from the tank; replace it with the new one and reassemble the tank onto the vehicle, following the tutorial until the end!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Vespa Px 125 .. tap on a Piaggio Vespa PX 125, as well as on the LML Star 125. First, put the central stand down and start unscrewing the seat screws to remove it. Then,.. …
Vespa Px 125 .. of the Piaggio Vespa PX 125, as well as the LML Star. First, place the central stand and begin to remove the fuel tank; to do this, unscrew the.. …
Vespa Px 125 .. plug of the Piaggio Vespa PX 125, as well as the LML Star 125. First, place the central stand and start removing the right side case by turning the small.. …

How to change the engine oil and oil filter on the KTM SX-F 450

The information in this guide will show you how to carry out the routine maintenance service by changing the engine oil and oil filter on the KTM SX-F 450 enduro bike. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, cleaning it or replacing it with a new one, as shown in the video. Unscrew the filler cap and top up with new engine oil!

Watch the video!


by ScegliAuto

More videos