Do it yourself
Frequently asked questions about cars and motorcycles

Model: Piaggio Zip
Part: Drivetrain

To replace the transmission of the Piaggio Zip, you need to loosen the screws that secure the appropriate casing, located near the rear wheel on the left side of the motorcycle: once the screws are loosened, you can completely remove the panel and locate the underlying transmission. The screws that secure the clutch and variator must all be loosened, so that the transmission belt can also be removed; all these components must then be replaced, so that the new ones can be inserted and everything can be checked to ensure that it works properly.

Posted on 30 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Zip To replace the belt on a Piaggio Zip, you need to loosen the bolts that secure the air filter cover, located directly above the transmission. Once th…
Zip To replace the rollers of the variator on a Piaggio Zip, you need to loosen the screws securing the cover of the casing, under which the transmission…
Zip To replace the exhaust fitted on the Piaggio Zip, loosen the screws that secure the exhaust terminal to its housing. Once the mounting screws are loo…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos