Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Gear Oil on a Piaggio Zip

Model: Piaggio Zip
Part: Transmission fluid

Video tutorial

Here are the brief instructions that will allow you to change the transmission oil on a Piaggio Zip scooter in simple and quick steps. First, place the scooter on its centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the fill screw to let the oil drain out more quickly.

At this point, pour in the new gear oil, using the quantity specified in the user and maintenance manual, and finally screw the fill cap back on!


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Piaggio Zip
How to Replace the Engine Oil and Oil Filter on the Piaggio Zip
Zip Regular maintenance service should be performed on every vehicle to ensure the proper functioning of the engine; here’s how to replace the engine oil…
How to Change the Engine Oil on a Piaggio Zip?
How to Change the Engine Oil on a Piaggio Zip?
Zip To change the engine oil on a Piaggio Zip, loosen the drain plug located at the central lower part of the device to collect all the used oil in a con…
How to Replace the Battery of the Piaggio Zip
How to Replace the Battery of the Piaggio Zip
Zip Follow these instructions to remove and replace the battery of the Piaggio Zip scooter by following these simple steps. First, place your scooter on …

How to Replace the Front Headlight Bulbs on a KTM Duke 125?

Replacing the front headlight bulb on the KTM Duke 125, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key is not inserted, then using a Torx screwdriver, remove both the bolts and the rivets securing the front fairing and separate it from the handlebars. Next, remove the large rubber cap located at the back of the headlight, disconnect the power connector, and unlock the metal clip. Once the bulb is extracted, insert the replacement without touching the glass directly with your bare hands, and finally reassemble everything.

Watch the video!


by ScegliAuto

More videos