Do it yourself
Frequently asked questions about cars and motorcycles

Model: Malaguti Xsm 125
Part: Battery

Today, you will learn how to remove and replace the battery of the Malaguti XSM 125 motorcycle, as well as the XTM 125. First, remove the rider's seat from your motorcycle; then, unscrew the screws of the side plastic fairings to access the battery, as shown in the video. At this point, disconnect both battery terminals (positive and negative) using a 10 mm spanner; then lift and remove the battery, replacing it with a new one of the correct type and with the same amperage. Now, reassemble everything!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Xsm 125 The procedure for replacing the muffler on the Malaguti XSM 125 is done by loosening the screws that fix the exhaust terminal to its housing: these s…
Xsm 125 To replace the exhaust on the Malaguti XSM 125, first, loosen the bolts securing the rear side panel, which protects the exhaust itself. Once the bol…
Xsm 125 The instructions in this guide will allow you to perform the routine maintenance service by changing the engine oil and oil filter on the Malaguti XS…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos