Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil of the Malaguti Madison K400, you need to loosen the drain plug located at the central lower part of the bike, allowing all the used oil to drain into a container. Once all the oil has drained out, you will need to remove the oil filter from its housing near the drain plug. After its removal, insert the new filter; additionally, top up by adding new oil through the designated hole on the side of the bike.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Malaguti Madison K400?
How do you replace the engine oil of the Malaguti Madison K400?
Madison K400 To perform the oil change on the Malaguti Madison K400, you will need to loosen the drain plug located in the central lower part of the motorcycle: o…
Removing the Rear Wheel of the Malaguti Madison K400
Removing the Rear Wheel of the Malaguti Madison K400
Madison K400 The main instructions in this guide will illustrate the procedure for removing the rear wheel of the Malaguti Madison K400 scooter. First, put it on …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos