Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Top Box on the Malaguti Dune 125

Model: Malaguti Dune 125
Part:

Video tutorial

Follow this guide to install the rear top box for helmets on the Malaguti Dune 125, using the instructions below. First, place your bike on the centre stand and start by installing the plastic tail piece where the top box will be mounted and secured; then fix the tail piece with its screws, attaching the plastic plate as shown in the video.

Once the tail piece is installed, you can mount the helmet top box onto it; then reassemble everything, following the video tutorial to the end!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Engine Oil Change on Malaguti Dune 125 - Derbi Terra 125
Dune 125 In this video, you will find the main instructions for performing an engine oil change during the regular maintenance service on a Malaguti Dune 125,…
How to Adjust the Valves on the Malaguti Dune 125?
How to Adjust the Valves on the Malaguti Dune 125?
Dune 125 To adjust the valves on the Malaguti Dune 125, you must first remove the seat and the fuel tank by loosening the appropriate bolts. Once these two pa…
How to Install Handguards on a Malaguti Dune 125?
How to Install Handguards on a Malaguti Dune 125?
Dune 125 To install handguards on a Malaguti Dune 125, first unscrew the protective caps located at the ends of the grips. Once removed, loosen the screws tha…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos