|
Do it yourself
| |||
| ||||
|
Model: Malaguti Dune 125
In this video, you will find the main instructions for performing an engine oil change during the regular maintenance service on a Malaguti Dune 125, but also on a Derbi Terra 125. First, remove the engine protection panel and then unscrew the drain bolt located under the engine; let the engine oil drain into a container. Next, unscrew the oil filter using a 24 mm socket and replace it with a new one; finally, pour in the new engine oil and fill to the correct level!
Updated on 7 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Dune 125
To replace the grips on a Malaguti Dune 125, grasp the old grips and pull them back to remove them from their housing. Once the old grips are removed…
Dune 125
The spark plug of the Malaguti Dune 125 can be replaced by disconnecting the corresponding ignition coil located on the top of the engine cylinder: o…
Dune 125
The exhaust that is installed on the Malaguti Dune 125 can be replaced by loosening the screws that secure it to the corresponding supports: these wi…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |