|
Do it yourself
| |||
| ||||
|
Model: Malaguti Dune 125
The spark plug of the Malaguti Dune 125 can be replaced by disconnecting the corresponding ignition coil located on the top of the engine cylinder: once the coil is removed, the spark plug can be removed from its seat using a specific socket wrench. After removing the old spark plug, the new one can be inserted and the coil can be repositioned. The engine can then be started to ensure that everything is functioning correctly.
Posted on 25 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Dune 125
In today's video, we'll see how to remove and replace the engine spark plug on a Malaguti Dune 125 in simple and quick steps. First, remove the fuel …
Dune 125
To replace the grips on a Malaguti Dune 125, grasp the old grips and pull them back to remove them from their housing. Once the old grips are removed…
Dune 125
The exhaust that is installed on the Malaguti Dune 125 can be replaced by loosening the screws that secure it to the corresponding supports: these wi…
|
How to Remove the Rear Wheel on the BMW G650 GS?
In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |