Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Suzuki Maruti Celerio - Air filter

Suzuki Maruti Celerio (2014-2023 / MK 1)
How to remove the air filter in the Maruti Celerio?
In this tutorial we can see how to disassemble the air filter in the Maruti Celerio, a very simple and quick operation to be carried out in case we need to …read all…
Posted on 7 June 2023 by ScegliAuto
Suzuki Maruti Celerio (2014-2023 / MK 1)
How to replace the air filter on Maruti Celerio
If we want to proceed with replacing the engine air filter as foreseen by the coupon on this car, we will find the indications on how to behave in the …read all…
Posted on 4 May 2023 by ScegliAuto
Suzuki Maruti Celerio (2014-2023 / MK 1)
How to replace the engine air filter on the Maruti Celerio
In order to replace the engine air filter on the car it is necessary to: open the bonnet, disconnect the air supply hose located on the left side of the …read all…
Posted on 5 May 2024 by ScegliAuto
Suzuki Maruti Celerio (2014-2023 / MK 1)
How to change the cabin air filter on the Maruti Celerio
To replace the passenger compartment air filter on the car it is necessary to proceed as follows: access the passenger compartment, move the seat away and …read all…
Posted on 25 April 2024 by ScegliAuto
Spark plugs (1) Tail light (1) Air filter (4) Cabin air filter (1) Light bulb (1) Third brake light (1) Front bumper (1) Brake pads (1) Instrument cluster (3) Wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos