Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Maxus
  4. :
  5. D90
  6. : How do you replace the suspension of the Maxus D90?

Maxus D90 - Video tutorial

Model: Maxus D90 MK 1 - Years 2017-2024
Part: Suspensions
Operation: How do you replace the suspension of the Maxus D90?

In order to replace the suspension of the Maxus D90 you have to go and lift the car, so that you can have access to the components in the lower part of the vehicle. In correspondence of the front and rear axle shafts it will be possible to find the suspension parts with the relative spring. It will be necessary to completely remove the pieces by unscrewing the bolts that secure them both in the front and in the upper part. Once they have been released, it will be possible to completely remove them by inserting the new ones; after they have been properly fixed, you will need to make sure that they work correctly.


Posted on 13 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos