Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Bt 50
    4. : Car stereo

Mazda Bt 50 - Car stereo

Mazda Bt 50 (2011-2023 / UP, UR)
How to change the language on the Mazda BT50 radio.
In this video, we see how it is possible to change the language setting on the Mazda BT50 car radio: we will use the two buttons/wheels located on the …read all…
Posted on 14 June 2023 by ScegliAuto
Mazda Bt 50 (2011-2023 / UP, UR)
How to remove the radio from the Mazda Bt50.
If we want to proceed to dismantle and possibly replace with another model, the car radio of our vehicle, in the description that is reported below we will …read all…
Posted on 23 May 2023 by ScegliAuto
Car stereo (2) -board computer (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos