Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 30
    4. : -board computer

Mazda Cx 30 - -board computer

Mazda Cx 30 (2019-2024 / MK 1, )
How to reset the service light on the Mazda CX 30
To reset the service light on the 2020 Mazda CX 30, we need to: - turn on the car's instrument panel and onboard computer; - press the arrow buttons on the …read all…
Posted on 5 April 2024 by ScegliAuto
Mazda Cx 30 (2019-2024 / MK 1, )
How to reset the oil indicator light on the Mazda CX 30.
In this new mini guide of ours, we will discover how to reset the engine oil light of your new Mazda CX 30. First of all, you obviously need to start the …read all…
Posted on 17 July 2023 by ScegliAuto
Battery (1) Key (2) -board computer (2) Checks and maintenance (4) Cabin air filter (1) Handle (1) Engine oil (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos