Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 30
    4. : Checks and maintenance

Mazda Cx 30 - Checks and maintenance

Mazda Cx 30 (2019-2024 / MK 1, )
How to reset the service in the Mazda CX-30?
In this tutorial we can see how to reset the service in the Mazda CX-30, an extremely simple and quick operation, to be carried out only once all scheduled …read all…
Posted on 2 May 2024 by ScegliAuto
Mazda Cx 30 (2019-2024 / MK 1, )
How to reset the service light on the Mazda CX-30?
In this tutorial, we can see how to reset the service light in the Mazda CX-30, an extremely simple and quick operation, to be performed only after completing …read all…
Posted on 22 December 2023 by ScegliAuto
Mazda Cx 30 (2019-2024 / MK 1, )
Resetting the service light on the Mazda CX 30.
Below we will see the guide that will allow us to reset the service light for the regular maintenance of the engine oil change of the Mazda CX 30. First of …read all…
Posted on 18 May 2023 by ScegliAuto
Mazda Cx 30 (2019-2024 / MK 1, )
How to reset the tire pressure in the Mazda Cx 30?
The tire pressure warning light in the Mazda Cx 30 can be reset in two different ways depending on the year of manufacture of the vehicle. In slightly older …read all…
Posted on 8 October 2022 by ScegliAuto
Battery (1) Key (2) -board computer (2) Checks and maintenance (4) Cabin air filter (1) Handle (1) Engine oil (1) Outside rearview mirror (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos