Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mazda
  4. :
  5. Cx 30
  6. : Handle

Mazda Cx 30 - Handle

Handle Mazda Cx 30 (2019-2026 / , mk 1)

Mazda Cx 30 (2019-2026 / , MK 1)
Removing the External Door Handle on a Mazda CX-30

Briefly, here are the instructions to remove and replace the external door handle on a Mazda CX-30. First, open the vehicle's door and begin removing the door …Read all…
Posted on 5 June 2026 by ScegliAuto
Mazda Cx 30 (2019-2026 / , MK 1)
How to replace the external handle on the Mazda CX-30?

To replace the external handle on the Mazda CX-30, open the door to locate the screw positioned on the side: this screw must be loosened to extract the …Read all…
Posted on 3 October 2026 by ScegliAuto
Mazda Cx 30 (2019-2026 / , MK 1)
Removing the External Handle of the 2020 Mazda CX30

To remove the external handle of the Mazda CX30, first remove the internal panel: Unscrew the screw beneath the internal handle, gently remove all the covers, …Read all…
Posted on 11 September 2026 by ScegliAuto

Key (9) Onboard computer (1) Checks and maintenance (1) Cabin air filter (3) Handle (3) Door trim panel (1) Instrument cluster (1) Fuse box (12) Side mirror (1) Warning light – error code (1) Tire pressure warning light (2) Service warning light (18) Fuel cap (2)

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos