Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the External Handle of the 2020 Mazda CX30

Model: Mazda Cx 30 , MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Handle

Video tutorial

To remove the external handle of the Mazda CX30, first remove the internal panel: Unscrew the screw beneath the internal handle, gently remove all the covers, both metal and plastic, that are clipped in, allowing all the connectors for the window lift and the rear-view mirror to hang.

Now unscrew the central screws above the handles and firmly detach the panel.

On the outer side of the door, you will find a slot with a very deep screw that secures the handle, requiring about 20 turns with a star screwdriver. Remove the handle support from the outside.

Now, from the inside, gently disconnect the upper spring and then the lower one, along with the connector for the automatic opening, which you will leave hanging inside. From the outside, you can now gently pull the handle towards you.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Removing the External Door Handle on a Mazda CX-30
Removing the External Door Handle on a Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) Briefly, here are the instructions to remove and replace the external door handle on a Mazda CX-30. First, open the vehicle's door and begin removing…
How to change the cabin air filter of the Mazda CX30
How to change the cabin air filter of the Mazda CX30
Mazda Cx 30 (2019-2026 / , MK 1) In this video, we will see how to change the cabin air filter on a Mazda CX30: we will need a plastic spatula to remove some parts that we will find …
How to Reset the Service Light on a Mazda CX30
How to Reset the Service Light on a Mazda CX30
Mazda Cx 30 (2019-2026 / , MK 1) Let’s see how to reset the service light on a Mazda CX30: turn on the ignition, then use the lever (or navigation buttons, depending on the version) …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos