Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin air filter of the Mazda CX30

Model: Mazda Cx 30 , MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

Video tutorial

In this video, we will see how to change the cabin air filter on a Mazda CX30: we will need a plastic spatula to remove some parts that we will find inside the glove compartment, located on the passenger side. We open the glove compartment completely and with the spatula, we remove the small frame located at the top back inside the compartment, which is actually the cap of the filter housing; on this there are two tabs, which we take with our fingers and use to pull it up. We clean the housing from dust and residue and place the new filter, paying attention to the direction of installation.

We put the cover back in place and the operation is complete.


Posted on 21 March 2025 by ScegliAuto


Related tutorials

How to change the cabin air filter of the Mazda CX-30.
How to change the cabin air filter of the Mazda CX-30.
Mazda Cx 30 (2019-2026 / , MK 1) .. In this video, we will see how to change the cabin air filter of the Mazda CX30: this filter is located inside the glove compartment.. …
Monitoring Tyre Pressure on the Mazda CX30
Monitoring Tyre Pressure on the Mazda CX30
Mazda Cx 30 (2019-2026 / , MK 1) In this video, you will see how to monitor the tyre pressure on the Mazda CX30: the tyre pressure warning light is represented by a cross-section of …
How to Change the Cabin Air Filter on a Mazda CX-30
How to Change the Cabin Air Filter on a Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) To change the cabin air filter on your Mazda CX-30, follow the steps outlined in this mini guide. First, park the vehicle safely on a flat road, then…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos