Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mazda CX30

Model: Mazda Cx 30 MK 1, - Years 2019-2026
Part: Service warning light

Let’s see how to reset the service light on a Mazda CX30: turn on the ignition, then use the lever (or navigation buttons, depending on the version) to scroll through the dashboard menu until you find the 'information' option. Press the central button on the lever (or the 'ok' button to enter the menu). Scroll until you find the 'vehicle status monitoring' option and confirm. From here, enter 'settings'. Select the 'reset' option and confirm by pressing 'ok'. At this point, the light should be reset, and you can exit the menu. The procedure is based on navigating the dashboard using the steering wheel controls.

Posted on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Tire pressure monitoring on the Mazda CX30
Tire pressure monitoring on the Mazda CX30
Mazda Cx 30 (2019-2026 / MK 1, ) In this video we can see how to monitor tire pressure on the Mazda CX30: the tire pressure warning light is that of a tire seen in section, yellow/or…
How to change the cabin air filter of the Mazda CX30
How to change the cabin air filter of the Mazda CX30
Mazda Cx 30 (2019-2026 / MK 1, ) In this video, we will see how to change the cabin air filter on a Mazda CX30: we will need a plastic spatula to remove some parts that we will find …
Removing the External Handle of the 2020 Mazda CX30
Removing the External Handle of the 2020 Mazda CX30
Mazda Cx 30 (2019-2026 / MK 1, ) To remove the external handle of the Mazda CX30, first remove the internal panel: Unscrew the screw beneath the internal handle, gently remove all th…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos