Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Seats and Steering Wheel of the Mazda CX-5?

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Steering wheel

To adjust the seats of the Mazda CX-5, use the controls located on the side of the seat facing the corresponding door: these will allow you to move the seat forwards and backwards, up and down. The seat adjustment controls can be manual or electric and vary depending on the model's trim. Once the seat is adjusted, you can also move the steering wheel: lower the lever located under the column so that it can be adjusted for depth or height according to the driver's needs.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Mazda CX-5?
Where are the fuses located in the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) The fuse boxes of the Mazda CX-5 are responsible for containing the fuses that regulate the operation of the devices installed on the vehicle: in thi…
Where are the fuses located in the Mazda CX-5?
Where are the fuses located in the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) The fuses in the Mazda CX-5 are located within specific fuse boxes installed inside the vehicle. The first is situated on the side of the footwell on…
How to Replace the Steering Wheel of the Mazda CX-5
How to Replace the Steering Wheel of the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In today's tutorial video, you will learn how to remove and replace the steering wheel of the Mazda CX-5 by following the instructions below. First, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos