Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats in the Mazda 2?

Model: Mazda 2 MK 3, DJ - Years 2014-2023
Part: Seat

In this tutorial we can see how to remove the rear seats in the Mazda 2, an extremely simple and quick operation. First of all, we open both rear doors and the trunk door, then we grab the seat from the front edge, pull it up forcefully and detach it from the base. We then unscrew the bolts at the ends of the backrests using a socket wrench, grab the backrests starting from the right one and remove them from the cabin. To install any replacement parts, simply follow the reverse procedure.

Posted on 23 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble and replace the rear brakes of the Mazda 2
How to disassemble and replace the rear brakes of the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) The following steps will show us how to disassemble and eventually replace the rear brakes (drum and shoes) of the Mazda 2. First, lift the vehicle a…
How to Remove the Struts from a Mazda 2
How to Remove the Struts from a Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Are the struts on your Mazda 2 faulty? Here’s how to remove and replace the struts on a rear hatch. Lift the hatch and secure it (use supports during…
How to disassemble the front seat of a Mazda 2?
How to disassemble the front seat of a Mazda 2?
Mazda 2 (2014-2023 / MK 3, DJ) To remove the front seat of a Mazda 2, start by moving the seat to the furthest back position possible to access the front bolts. Turn off the engine…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos