Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the rear brakes of the Mazda 2

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Brake drums and shoes

The following steps will show us how to disassemble and eventually replace the rear brakes (drum and shoes) of the Mazda 2. First, lift the vehicle and start by removing the rear wheel, unscrewing the bolts; then, unscrew the drum and central nut screws, in order to remove it, as shown in the video. At this point, if necessary, replace the shoes, releasing the retaining spring; install the new original shoes and check the wear of the drum, reassembling everything and replacing the brakes on the other side in the same way.

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats in the Mazda 2?
How to remove the rear seats in the Mazda 2?
Mazda 2 (2014-2023 / MK 3, DJ) In this tutorial we can see how to remove the rear seats in the Mazda 2, an extremely simple and quick operation. First of all, we open both rear doo…
Replacement of the license plate light bulb of the Mazda 2
Replacement of the license plate light bulb of the Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) Today's procedure will show us how to disassemble and replace the license plate light bulb of the Mazda 2, following the instructions below. First, l…
How to replace the battery of the Mazda 2 car remote control
How to replace the battery of the Mazda 2 car remote control
Mazda 2 (2007-2014 / DE, MK 2, DH) Today we will see how to replace the battery of the remote control of a Mazda 2 vehicle. To perform the replacement, we need to get a CR 16 20 model …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos