Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 2
    4. : Brake drums and shoes

Mazda 2 - Brake drums and shoes

Brake Drums And Shoes Mazda 2 (2007-2014 / de, mk 2, dh)

Mazda 2 (2007-2014 / DE, MK 2, DH)
How to disassemble and replace the rear brakes of the Mazda 2
The following steps will show us how to disassemble and eventually replace the rear brakes (drum and shoes) of the Mazda 2. First, lift the vehicle and start …Read all…
Posted on 20 March 2025 by ScegliAuto
Mazda 2 (2007-2014 / DE, MK 2, DH)
How to replace the rear brake pads on the Mazda 2?
In this tutorial we can see how to replace the rear brake shoes in the Mazda 2, an extremely simple and quick operation. First of all, park the vehicle in a …Read all…
Posted on 22 October 2024 by ScegliAuto
Speaker (2) Car stereo (1) Battery (2) Body (1) Key (22) Timing belt (1) V-belt (1) Onboard computer (1) Checks and maintenance (7) Headlight (2) Tail light (2) Air filter (3) Cabin air filter (5) Accessory kit (1) Headlight bulb (6) License plate light (3) Handle (1) Starter motor (2) Clock (9) Door trim panel (7) Front bumper (2) Rear bumper (1) Hydraulic pistons (1) Tires (1) Shift knob (2) Instrument cluster (1) Wheel (1) Fuse box (10) Seat (2) Side mirror (2) Rearview mirror (1) Warning light – error code (5) (4) Tire pressure warning light (3) Service warning light (37) Brake drums and shoes (2) Fuel cap (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos