Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 2
    4. : Cabin air filter

Mazda 2 - Cabin air filter

Cabin Air Filter Mazda 2 (2007-2014 / de, mk 2, dh)

Mazda 2 (2007-2014 / DE, MK 2, DH)
How to replace the cabin air filter of the Mazda 2
Replacing the cabin air filter on a Mazda 2, model produced from 2007 to 2014, involves simple and quick steps to be carried out independently. To replace the …Read all…
Posted on 2 September 2024 by ScegliAuto
Mazda 2 (2007-2014 / DE, MK 2, DH)
How to Replace the Pollen Filter on a Mazda 2.
In this video tutorial, you can see how to replace the pollen filter on a Mazda 2 by following a few simple steps: the first thing to do is to purchase a new …Read all…
Posted on 28 July 2026 by ScegliAuto
Mazda 2 (2007-2014 / DE, MK 2, DH)
How to Remove the Cabin Pollen Filter on Mazda Mazda 2
Follow these steps to remove the cabin pollen filter on Mazda Mazda 2: Open the glove compartment and pull down the drawer using a plastic lever (use a …Read all…
Posted on 18 March 2026 by ScegliAuto
Mazda 2 (2007-2014 / DE, MK 2, DH)
Replacing the Cabin Air Filter
This guide explains how to replace the cabin air filter in your car. It is a procedure that should be done periodically and is essential for the health of the …Read all…
Posted on 3 March 2026 by ScegliAuto
Mazda 2 (2007-2014 / DE, MK 2, DH)
Replacing the Cabin Air Filter
The cabin air filter is located behind the centre tunnel: remove the screws securing the filter container cap and extract the two filters. Insert the new …Read all…
Posted on 12 February 2026 by ScegliAuto
Speaker (2) Car stereo (1) Battery (2) Body (1) Key (22) Timing belt (1) V-belt (1) Onboard computer (1) Checks and maintenance (7) Headlight (2) Tail light (2) Air filter (3) Cabin air filter (5) Accessory kit (1) Headlight bulb (6) License plate light (3) Handle (1) Starter motor (2) Clock (9) Door trim panel (7) Front bumper (2) Rear bumper (1) Hydraulic pistons (1) Tires (1) Shift knob (2) Instrument cluster (1) Wheel (1) Fuse box (10) Seat (2) Side mirror (2) Rearview mirror (1) Warning light – error code (5) (4) Tire pressure warning light (3) Service warning light (37) Brake drums and shoes (2) Fuel cap (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos