Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 2
    4. : Cabin air filter replacement

Mazda 2 - Video tutorial

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Cabin air filter
Operation: Cabin air filter replacement

This guide explains how to replace the cabin air filter in your car. It is a procedure that must be done periodically and is essential for the health of the driver and passengers. The operation can be done without resorting to a mechanic, thus saving some money. The air filter can be found in all auto parts and accessories stores. It is usually at the front of the passenger side, underneath the glove box. The panel will be released from its seat and the cover of the box containing the filter will be removed with a Phillips screwdriver. Just grab it with your thumb and pull it out of its housing.


Posted on 9 September 2023 by ScegliAuto



Cabin air filter replacement
Mazda 2 (2007-2014 / DE, MK 2, DH) The cabin air filter is located behind the central tunnel: therefore remove the fixing screws of the filter container cap and extract the filters whi
How to remove the cabin pollen filter on Mazda Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Let's see how to remove the cabin pollen filter on Mazda Mazda 2: open the glovebox and pull the drawer inside the dashboard with a plastic lever (we
How to replace the pollen filter on a Mazda 2.
Mazda 2 (2007-2014 / DE, MK 2, DH) In this video tutorial, we can see how it is possible to replace the pollen filter on a Mazda 2, following a few simple steps: the first thing to do

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos