Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on the Mazda 2

Model: Mazda 2 DJ, MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
Video tutorial

Periodically replacing the air filter on the Mazda 2 ensures optimal engine performance and controlled fuel consumption. To change it, open the bonnet, and locate the filter box just before the battery.

Unclip the metal clips at its base, use a flathead screwdriver to loosen the clamp on the hose to its left, and slide it off. Remove the cover to take out the old filter element, replace it with a new filter, reposition the cover, secure it with the two clips, and reconnect the hose, fastening it with its clamp.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to replace the remote control battery for the Mazda 2?
How to replace the remote control battery for the Mazda 2?
Mazda 2 (2007-2014 / MK 2, DH, DE) To replace the battery in the remote control for the Mazda 2, use a thin object as a lever to separate the two halves of the device: this will allow …
How to Reset the Service Light on the Mazda 2
How to Reset the Service Light on the Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) If you need to manually reset the service light on your Mazda 2, simply pay attention to the steps described below and then put them into practice. F…
Replacing the number plate bulb in the Mazda 2
Replacing the number plate bulb in the Mazda 2
Mazda 2 (2014-2023 / DJ, MK 3) Today's procedure will show you how to remove and replace the number plate bulb in the Mazda 2, following the instructions below. First, move to the …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos