Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Mazda 2

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Air filter

To replace the engine air filter in your Mazda 2 (2007-2014), follow these simple steps. First, turn off the car and open the front bonnet to access the engine compartment. Locate the air filter box on the right side and use a cross-head screwdriver to unscrew the various screws. Remove the cover of the box and replace the old air filter with a new one. Finally, refit the protective cover and screw all the previously removed screws back in.

Updated on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Air Filter on a Mazda 2
How to Replace the Engine Air Filter on a Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Replacing the engine air filter on your second generation Mazda 2 is very simple, and to complete the operation, just read the following guide and ap…
How to replace the cabin air filter of the Mazda 2
How to replace the cabin air filter of the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Replacing the cabin air filter on a Mazda 2, model produced from 2007 to 2014, involves simple and quick steps to be carried out independently. To re…
Replacement of the air filter of the Mazda 2
Replacement of the air filter of the Mazda 2
Mazda 2 (2014-2023 / MK 3, DJ) By periodically replacing the air filter of the Mazda 2, you achieve optimal engine performance and keep fuel consumption under control. To change it…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos