Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Mazda 2 MK 2, DH, DE - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
This video is currently unavailable

The cabin air filter is located behind the centre tunnel: remove the screws securing the filter container cap and extract the two filters. Insert the new filters, first the front one and then the rear one, ensuring they slide into the appropriate grooves inside the container.

Finally, reapply the cap and tighten the securing screws. After replacing the filters, it is recommended to sanitise the cabin using a suitable germicidal spray, which will not only freshen the cabin but also eliminate potential fungi from the ventilation ducts.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on the Mazda 2
How to Replace the Cabin Air Filter on the Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) .. Replacing the cabin air filter on a Mazda 2, produced from 2007 to 2014, involves simple and quick steps.. …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Mazda 2 (2007-2014 / MK 2, DH, DE) This guide explains how to replace the cabin air filter in your car. It is a procedure that should be done periodically and is essential for the heal…
How to Replace the Air Filter on the Mazda 2
How to Replace the Air Filter on the Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) To replace the engine air filter in your Mazda 2 (2007-2014), follow these simple steps. First, turn off the car and open the front bonnet to access …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos