Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Pollen Filter on Mazda Mazda 2

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Cabin air filter

Follow these steps to remove the cabin pollen filter on Mazda Mazda 2: Open the glove compartment and pull down the drawer using a plastic lever (use a screwdriver if there are screws). Once this is done, remove the glove compartment drawer downwards after disconnecting the power cables. Unscrew the securing bolts of the fuse box with a screwdriver or socket, then remove the cover and pull out the air filter from its housing as shown in the video. Finally, insert the new filter and reassemble all components of the glove compartment as they were removed.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Pollen Filter on a Mazda 2.
How to Replace the Pollen Filter on a Mazda 2.
Mazda 2 (2007-2014 / DE, MK 2, DH) In this video tutorial, you can see how to replace the pollen filter on a Mazda 2 by following a few simple steps: the first thing to do is to purcha…
How to replace the cabin air filter of the Mazda 2
How to replace the cabin air filter of the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Replacing the cabin air filter on a Mazda 2, model produced from 2007 to 2014, involves simple and quick steps to be carried out independently. To re…
How to Replace the Engine Air Filter on a Mazda 2
How to Replace the Engine Air Filter on a Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Replacing the engine air filter on your second generation Mazda 2 is very simple, and to complete the operation, just read the following guide and ap…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos