Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Mazda 2

Model: Mazda 2 DE, MK 2, DH - Years 2007-2014
Part: Tail light

In this video tutorial, see how to remove the rear light of a Mazda 2. The steps are very simple; first, open the boot lid, where you will find the two screws holding the light in place. Unscrew them and gently pry out the light. At this point, you can change just the bulb, or by disconnecting the bulb holder and the wiring, replace the entire unit. When remounting the rear light, ensure it is positioned correctly following the guides as shown in the video. Once done, simply re-screw the two screws removed earlier to complete the job.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Number Plate Light Replacement on a Mazda 2
Number Plate Light Replacement on a Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Let's see how to replace the number plate bulb on a Mazda 2. Use plastic levers to remove the number plate light. Remove the light unit located in th…
How to remove the rear bumper of the Mazda 2
How to remove the rear bumper of the Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) The removal of the rear bumper is a very simple operation to perform independently. To remove the bumper of the Mazda 2, we must first unclip the pla…
How to Remove the Cabin Pollen Filter on Mazda Mazda 2
How to Remove the Cabin Pollen Filter on Mazda Mazda 2
Mazda 2 (2007-2014 / DE, MK 2, DH) Follow these steps to remove the cabin pollen filter on Mazda Mazda 2: Open the glove compartment and pull down the drawer using a plastic lever (use…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos