Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Steering Wheel and Airbag from the Mazda CX-5 MK1

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part: Steering wheel

In this tutorial, you will learn how to remove the steering wheel and its airbag from the first series Mazda CX-5 in simple and quick steps. First, get inside the vehicle and start by disconnecting the airbag mechanism on the back of the steering wheel by pressing on the holes; then disconnect the electrical connector to remove the airbag. Next, use a socket wrench with an extension to undo the central bolt of the steering wheel to remove it; finally, position the new steering wheel straight, and then refit the airbag!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Steering Wheel of the Mazda CX-5
How to Replace the Steering Wheel of the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In today's tutorial video, you will learn how to remove and replace the steering wheel of the Mazda CX-5 by following the instructions below. First, …
How to enable or disable the passenger airbag in the Mazda CX5 MK1
How to enable or disable the passenger airbag in the Mazda CX5 MK1
Mazda CX-5 (2012-2017 / MK 1, KE) .. or disable the passenger airbag on a Mazda CX5 MK1: this operation may be necessary when we need to transport a very small child in the front seat,.. …
How to Install Paddle Shifters in the Mazda CX-5
How to Install Paddle Shifters in the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In today's video, see how to install paddle shifters in the Mazda CX-5. First, proceed with the installation of all components found inside the packa…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos