Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console of the Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Dashboard

Today, you will learn how to remove the upper and lower centre console of the Mazda 3. For this simple operation, no special tools are required, such as a flathead screwdriver or plastic trim removal tools. To remove the vehicle's plastics, simply slide the passenger and driver seats back; insert your hand into the lower left section and pull upwards forcefully on the plastics, being careful not to damage the clips and the central connector. After removing the lower part of the console, remove the upper part using the same procedure.

Posted on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Airbag Control Unit
Removing the Airbag Control Unit
Mazda 3 (2009-2013 / MK 2, BL) To remove the control unit that manages the airbag operation, first disconnect the battery. The component is located under the handbrake. In most cas…
How to Reset the Engine Oil Service Light on a Mazda 3
How to Reset the Engine Oil Service Light on a Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Follow this guide to reset the service light for the routine maintenance oil change on a Mazda 3. First, get into the vehicle and turn on the ignitio…
Resetting the service indicator light of the Mazda 3
Resetting the service indicator light of the Mazda 3
Mazda 3 (2019-2026 / MK 4, BP) Today we will discover the instructions that will allow us to reset the service light for the regular maintenance of the engine oil change of the Maz…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos