Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver's seat in the Mazda 3?

Model: Mazda 3 BK, MK 1 - Years 2003-2009
Part: Seat

In this tutorial, you will see how to remove the driver's seat in the Mazda 3, a very simple and quick operation. Before proceeding, open the bonnet and disconnect the battery terminals to avoid accidental airbag deployment. Start by opening both left doors, then move the seat all the way back, remove the plastic covers from the brackets, and unscrew the front bolts with a 14 mm socket. Next, unscrew the two rear bolts, lift the seat base, and disconnect the airbag connector. At this point, simply extract the seat from the cabin and install the replacement if necessary.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear shift knob of the Mazda 3
How to remove the gear shift knob of the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) If you want to find out how you can disassemble the gear knob of your Mazda 3 on your own, just read the following guide and follow all the steps des…
Guide to Removing the Front Seat of the Mazda 3
Guide to Removing the Front Seat of the Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Today's guide shows you how to remove and replace the front seat of the Mazda 3, following the instructions below. First, open the front door and sta…
How to open the fuel tank cap of the Mazda 3
How to open the fuel tank cap of the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Opening the fuel tank cap of the Mazda 3 is a really simple and quick operation. To carry out this operation, we must get into the car, sit on the dr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos