Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Battery on a Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Battery

Today we will see the instructions that will allow you to remove and replace the battery on a Mazda 3 in simple steps. First, open the engine bonnet of the vehicle and start by removing the upper plastic cover of the battery; then disconnect both terminals (positive and negative), as shown in the video. Now unscrew the battery bracket screw, remove it from its compartment, and replace it with the new original one (of the correct type and with the same amperage); insert it the right way, connect it, and check the engine starts!

Posted on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the Mazda 3
How to Replace the Remote Battery of the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Replacing the battery of the Mazda 3 remote is very simple. To replace the battery, you need to: - open the remote by inserting a flat-head screwdriv…
How to Replace the Remote Key Battery on the Mazda 3?
How to Replace the Remote Key Battery on the Mazda 3?
Mazda 3 (2019-2026 / MK 4, BP) Replacing the battery in the Mazda 3 remote key, as shown in this tutorial, is an extremely simple and quick operation. To do this, you will need a s…
How to Replace the Remote Key Battery on the Mazda 3?
How to Replace the Remote Key Battery on the Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) To replace the remote key battery on the Mazda 3, slide the key out from the top of the device: once removed, you can leverage inside the groove that…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos