Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of a Mazda 3 car

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Battery

In this video tutorial, we can see how to proceed with the replacement of the battery in a Mazda 3 car. First of all, it will be necessary to have access to the engine compartment, to do this you will need to lift the hood and secure it safely with the appropriate rod. At this point, once the battery is located, it will be necessary to remove the outer cover and then proceed to remove the fastening bar located above the battery: to do this we will need to unscrew the screws at the base. Subsequently, we will need to remove the screws holding the clamps in place and proceed to detach them, remembering to remove the negative pole first and then the positive one. At this point, we can remove the battery from its compartment and proceed with its replacement.

Posted on 25 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Outside Temperature Sensor on a Mazda 3
How to Remove the Outside Temperature Sensor on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) In this guide, remove the outside temperature sensor on a Mazda 3. Lift the car on a column lift and remove the wheel. To access the temperature sens…
How to Replace the Remote Battery of the Mazda 3
How to Replace the Remote Battery of the Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) Replacing the battery of the Mazda 3 remote is very simple. To replace the battery, you need to: - open the remote by inserting a flat-head screwdriv…
How do you program the key of the Mazda 3 after replacing the battery?
How do you program the key of the Mazda 3 after replacing the battery?
Mazda 3 (2019-2026 / MK 4, BP) If the battery of your car key/remote runs out, it can happen, including the Mazda 3 mentioned here. In case this causes the decoding, you must remed…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos