Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Battery

Mazda 3 - Battery

Mazda 3 (2013-2019 / MK 3, BN, BM)
To reset the i-stop function of the Mazda 3.
To reset the "i-stop" warning light on the Mazda 3, start by turning on the instrument panel and then starting the car's engine. Once the engine is running, …read all…
Posted on 1 November 2023 by ScegliAuto
Mazda 3 (2013-2019 / MK 3, BN, BM)
Replacement of the Mazda 3 key battery.
Below we will see step-by-step instructions useful for disassembling and replacing the battery of the Mazda 3 key remote control. First, we take our remote …read all…
Posted on 4 June 2023 by ScegliAuto
Mazda 3 (2013-2019 / MK 3, BN, BM)
Mazda 3 battery replacement
Today we will see, in this video tutorial, how to disassemble and replace the Mazda 3 engine battery, in simple and quick steps. First of all we open the …read all…
Posted on 21 April 2024 by ScegliAuto
Mazda 3 (2013-2019 / MK 3, BN, BM)
Battery replacement on Mazda 3
When working with the engine off and the handbrake on, lift the hood and stop it safely with the special support rod. Unscrew the four 10 mm nuts and …read all…
Posted on 4 March 2024 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
Mazda 3 key battery replacement
The replacement of the remote control battery is necessary when, by pressing any button on the remote control, the red led next to the Mazda symbol no longer …read all…
Posted on 13 November 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Battery replacement instructions
The battery is located in the engine compartment, just behind the air filter container. Before proceeding with the replacement, make sure of the correct model …read all…
Posted on 16 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos