Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Light bulb

Mazda 3 - Light bulb

Mazda 3 (2009-2013 / MK 2, BL)
Replacement of the front turn signal bulb of the Mazda 3.
Today in this guide, we will see the instructions that will allow us to disassemble and replace the front turn signal bulb of the Mazda 3. First, let's unscrew …read all…
Posted on 25 August 2023 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
How do i replace the reversing bulbs on the Mazda 3?
In order to replace the Mazda 3 reverse light bulbs, you have to lift the boot lid and remove the rivets that secure the carpet on the rear of the boot. Once …read all…
Posted on 28 February 2024 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Fog light bulb replacement
To carry out this replacement it will be necessary to work from the lower part of the car, in fact you will have to remove the panel under the engine to then …read all…
Posted on 20 September 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to change the bulbs of a mazda 3
Hi, in this video we will see how to replace the car light bulb quickly and easily. Once the hood has been opened, you go to the light to change. Put your hand …read all…
Posted on 20 September 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
License plate light bulb replacement
In order to replace the rear license plate light bulb, the bulb holder must be removed: this is attached to the bumper by means of two plastic tabs; It is …read all…
Posted on 15 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos