Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : License plate light bulb replacement

Mazda 3 - Video tutorial

Model: Mazda 3 MK 1, BK - Years 2003-2009
Part: Light bulb
Operation: License plate light bulb replacement

In order to replace the rear license plate light bulb, the bulb holder must be removed: this is attached to the bumper by means of two plastic tabs; It is therefore sufficient to slightly widen the tabs to be able to remove it. At this point, remove the old bulb (T5 socket) and insert the new one. Check that the light bulb is switched on: if it is not successful, check that the correct power supply voltage reaches the lamp holder, otherwise inspect the power cable which, due to its positioning, may be subject to damage.


Posted on 15 July 2023 by ScegliAuto



Interior ceiling light bulb replacement
Mazda 3 (2003-2009 / MK 1, BK) Remove the ceiling light cover to access the lamp holder. Disconnect the ceiling light by removing the connector. Open the lower compartment of the c
Headlight bulb replacement
Mazda 3 (2003-2009 / MK 1, BK) To be able to replace the headlight bulb, open the hood and remove the triangular-shaped plastic cover located just above the headlight. At this poin
Replacement of the rear lights bulbs of the Mazda 3.
Mazda 3 (2013-2019 / BN, BM, MK 3) In this video, we see what to do if one of the rear light bulbs were to burn out; we see how to proceed with the replacement. We open the trunk door,

How to activate the cruise control of the Nissan Qashqai

Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out.

Watch the video!


by ScegliAuto

More videos