Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Fog Light Bulb

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

See other generations:
Video tutorial

To carry out this replacement, you will need to work from underneath the car. You must remove the panel beneath the engine to access the rear of the bumper where the connectors for the lights are located. Once you find the position of the fog lights, disconnect the connectors.

After doing this, rotate the bulbs to extract them easily and replace them. Finally, reconnect the connectors and reattach the panel beneath the engine, following the previous steps in reverse.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulbs on a Mazda 3
How to Replace the Front Headlamp Bulbs on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Learn how to replace the front headlamp bulbs on a Mazda 3 with LED bulbs: open the bonnet (pull the lever located at the bottom right of the dashboa…
How to Replace the Bulbs in the Rear Light of a Mazda 3
How to Replace the Bulbs in the Rear Light of a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Change the blown bulbs inside the boot from which you access the rear light of a Mazda 3. Use a screwdriver to remove the plastic panel covering the …
Installation of the Front Headlamp Bulb
Installation of the Front Headlamp Bulb
Mazda 3 (2003-2009 / BK, MK 1) Installing the front headlamp bulb is a fairly simple task. Remove the bolt at the front of the front wing, disconnect the headlamp connector, and pu…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos