Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front turn signal bulb of the Mazda 3.

Model: Mazda 3 BM, BN, MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Light bulb

See other generations:
Video tutorial

Today we will discover the main steps that will allow us to disassemble and replace the front turn signal bulb of the Mazda 3. First, let's move to the front and start unfastening the clips of the panel located under the front bumper to access the turn signal bulb.

Then, we will remove the bulb holder from the turn signal fixture and subsequently take out the bulb, as shown in the video.

At this point, we will install the new turn signal bulb, which has the same fitting; we will reassemble the bulb holder and finally secure the plastic panel!


Posted on 12 December 2025 by ScegliAuto


Related tutorials

Replacing the Front Indicator Bulb on a Mazda 3
Replacing the Front Indicator Bulb on a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Today, this guide provides instructions to dismantle and replace the front indicator bulb on a Mazda 3. First, unscrew the fastening screws of the fr…
Replacing Indicator Light on Mazda 3
Replacing Indicator Light on Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Here’s how to disassemble the indicator light on a Mazda 3. Use a lever between the indicator light and the car's body (without damaging the bodywork…
How to Replace the Front Headlamp Bulb on the Mazda 3
How to Replace the Front Headlamp Bulb on the Mazda 3
Mazda 3 (2013-2019 / BM, BN, MK 3) Today, you will learn how to replace the front headlamp bulb on a Mazda 3. To replace the bulb, open the front bonnet of the vehicle and disconnect t…

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos