Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper on the Mazda 3?

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Front bumper

See other generations:
Video tutorial

In this tutorial, we can see how to remove the front bumper on the Mazda 3, an extremely simple and quick operation. First, we open the hood, then we unscrew the screws on the upper edge of the bumper using a cross-tip screwdriver.

Next, we unscrew the screws on the inner front side of both wheel arches, then continue by unscrewing the screws on the lower edge and, grabbing it from one of the ends, separate the bumper from the frame. Finally, disconnect the connectors of the fog lights, if present, and install any replacement following the reverse procedure.


Posted on 15 March 2025 by ScegliAuto


Related tutorials

Removing the Front Bumper on a Mazda 3
Removing the Front Bumper on a Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) Is the front bumper of your Mazda 3 damaged? Let's see how to remove it. Lift the bonnet and secure it, then raise the car on a jack; unscrew the fas…
How to Remove the Front Bumper on a Mazda 3
How to Remove the Front Bumper on a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Want to remove the front bumper on a Mazda 3 to replace or repair it? This guide will show you how to proceed through the various stages of disassemb…
How to Remove the Front Bumper on a Mazda 3?
How to Remove the Front Bumper on a Mazda 3?
Mazda 3 (2013-2019 / BM, BN, MK 3) In this tutorial, you will see how to remove the front bumper on a Mazda 3, a very simple and quick operation. First, open the bonnet. Then, unclip t…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos