Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Mazda 3
    4. : Front bumper

Mazda 3 - Front bumper

Mazda 3 (2013-2019 / MK 3, BN, BM)
How to remove the front bumper on the Mazda 3?
In this tutorial, we can see how to remove the front bumper on the Mazda 3, a very simple and fast operation. First, we open the hood, then we remove the upper …read all…
Posted on 7 September 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
Remove the front bumper on Mazda 3
Is the front bumper of the Mazda 3 damaged? We want to replace it. Let's see how it is disassembled. We raise the bonnet and put it in safety, we lift the car …read all…
Posted on 9 December 2023 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
How to remove the front bumper of a Mazda 3
Do you want to remove the front bumper of a Mazda 3 to change or repair it? Let's see in this video how to proceed in the various stages of disassembly of the …read all…
Posted on 29 September 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to remove the front bumper
To remove the front bumper it is necessary to open the bonnet and, with the aid of a Phillips and a slotted screwdriver, unscrew the screws that keep it fixed. …read all…
Posted on 23 September 2023 by ScegliAuto
Mazda 3 (2009-2013 / MK 2, BL)
Front bumper disassembly
The front bumper consists of an external cover in the same color as the car body and an internal reinforcement that houses the black plastic shock absorbing …read all…
Posted on 5 September 2023 by ScegliAuto
Mazda 3 (2003-2009 / BK, MK 1)
How to replace the front bumper
Has your bumper been dented, scratched or even cracked? Replacing it is much simpler than expected: the only tools you will need to do this are a screwdriver …read all…
Posted on 24 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (4) Alternator (3) Loudspeaker (2) Shock absorbers (7) Air conditioning (5) Car stereo (7) Anti roll bar (1) Battery (6) Air Vents (1) Spark plugs (8) Bodywork (3) Key (24) V-belt (1) -board computer (10) Checks and maintenance (32) Throttle body (1) Dashboard (2) Brake discs (2) Headlight (3) Tail light (4) Fog lights (1) Air filter (5) Cabin air filter (10) Petrol filter (2) Diesel filter (3) Oil filter (3) Hand brake (1) Grille (1) Accessory Kit (10) Xenon headlight kit (1) Light bulb (5) Side turn signal light bulb (2) Headlight bulb (12) Rear light bulb (5) Interior lights ceiling light bulb (2) Antifreeze liquid (1) Handle (5) Engine (1) Gear oil (2) Brake oil (1) Engine oil (14) Power steering oil (1) Door panel (5) Front bumper (6) Rear bumper (1) Brake pads (6) Tires (8) Gear Shift Knob (1) Pump (1) Instrument cluster (14) Radiator (1) Fuse box (10) Seat (4) Coolant temperature sensor (3) Outside rearview mirror (9) Interior rearview mirror (1) Manufacturer's coat of arms (1) Windscreen wipers (4) Central tunnel (2) Valve (1) Interior blower (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos