Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Front bumper disassembly

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Front bumper
Operation: Front bumper disassembly

The front bumper consists of an external cover in the same color as the car body and an internal reinforcement that houses the black plastic shock absorbing strip and the underlying ventilation grille; therefore, if you need to retouch the bumper, it is advisable to remove the shock absorbing strip rather than masking everything; therefore once the complete bumper has been removed from the bodywork, proceed with the removal of the pressure stops and the various fixing screws of the internal reinforcement to be able to remove it completely and then complete the disassembly with the removal of the frieze: in the end a sort of fairing will remain .


Posted on 5 September 2023 by ScegliAuto



Front headlight disassembly instructions
Mazda 3 (2009-2013 / MK 2, BL) In order to disassemble the front light, it is first necessary to remove the front bumper: therefore, start by opening the front hood and removing th
How to remove the front bumper of a Mazda 3
Mazda 3 (2009-2013 / MK 2, BL) Do you want to remove the front bumper of a Mazda 3 to change or repair it? Let's see in this video how to proceed in the various stages of disassemb
Front mudguard disassembly instructions
Mazda 3 (2009-2013 / MK 2, BL) To be able to disassemble the front fender, you must first remove the bumper and the headlights: start by opening the front hood and remove the press

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos